How to connect on Smartlogger 3000 using WAN and LAN port
This sectrion describes how to connect on Smartlogger3000 with a PC. The default IP of the Smartlogger3000 is 192.168.0.10 and the password “Changeme”. After you connect for the first time you need to change the password.
We recommend to use IE or Chrome browser.
Procedure:
Step 1 Connect the Ethernet cable in the WAN port
(6) GE port (WAN) (11) GE port (LAN)
Step 2 Set the IP address for the PC on the same network segment as the SmartLogger IP address.
Go to Windows start->Control Panel->Network and Internet->Network and Sharing Center->Change adapter settings->Double click on Local Area Connection->Double click on Internet Protocol Version 4 and set the IP like below:
Connect with an Ethernet cable on WAN port of the Smartlogger3000 your PC. Open a browser (Chrome 50 or IE11) and type the next link: https://192.168.0.10
Chose user name “Advanced User” and type in the password. The default password is “Changeme”.
If the message appear before connect like below: for IE select “Continue to this website (not recommended) and for Chrome select “Hide advanced” and Proceed to 192.168.0.10(unsafe).
Login:
Step 4 Set the Ethernet parameters
The wired network IP is referring to the WAN port network.
You can also watch the video tutorial at this link: How to access Smartlogger WebUI.