Applying Zero Export Settings remotely

If you need to limit export to the grid, you can configure it remotely.

Prerequisites

You have installed and connected the smart meter to the system.

Procedure

1. Choose Plants > Device > Device Management
2. Select the Plant, mark the Smart Dongle or Smart Logger > click Set Parameters
3. In the appeared window go to Active Power Control and select the control mode. For zero export  select Zero Export Limitation
4. Select the Inverter as closed loop controller for Single inverter, response time will be 2 seconds. 
   Select the SDongle/Smart Logger if quantity of inverters is 2 or more, response time will be 2 seconds for Smart Logger and 5 seconds for SDongle.
5. Select Limitation mode as Single-phase power in case of unbalanced load or Total power in case of balanced load and if it's possible to export some energy to the grid
6. Click Set > Confirm.